LED-1204TS Pick and place machine is our skillful products for the
2015 to feedback our clients around the world with its excellent
stability and Leadsmt's practical spirit .
Here is the Features of our 2015 New pick and place machine :
1.All of the driving system adopt Panasonic Servo Motor ,Imported from Japan ,ensure moving smoothly without any Pause
,Totally 7 Pieces of different sizes Panasonic Servo Motors .
2.The X,Y, axis all move on linear rails imported from TaiWan ,Combined with NSK Screw ball imported from Japan ,which made the pick and place with higher
precision up to 0.01mm .
3. Industrial Class Computer ,with Philips LCD ,Great Wall brand
Driver ,design for 10 years lifetime.
4.Equipped with Vacuum Pump system ,to filter the water of the air
and make air pressure stability .
5.The Flexible feeder fictures allow you to adjust the feeders
position when needed for different angle components ,the machine
normally can upload 14 pieces of 8mm feeders ,Max can be 20 pieces.
6.Unique Design air pressure system ,when air pressure blow down the components when the components just touch
the board , the nozzles no touch the board ,therefore ,will highly
increase the Practical stable speed of the machine up to 22000 cph for LED-1204TS And 28000cph for LED-1206TS .
1.The software control boards designed and made by ourselves with 5
years trails in the world,by doing so can save USD 1500 cost for
each machine .
2.Negative Pressure detection watches brand Taiwan Kait ,Can feel
whether the machine pick and place the components successfully or
not , if the machine leak or skip and fail to pick and place the
components , the system will instruct the machine automatic to come
back to re-pick and place again ,No need stop and do again .
3.Software together with CCD Vision camera do the programming ,the
same project just need one time program and save the data in the
computer ,next time just open it directly can do the project .
4.the Software allow the engineer to make the aligments adjustment
when pick and place working .
|PICK AND PLACE SYSTEM|
|Mounting Heads||4 pieces||6 pieces|
|Stable practical Speed||22000cph||28000cph|
|Max Mounting pcb size||1200mm*320mm||1500mm*500mm|
|pick and place components size|
all kinds of leds and most smd components including the follows
IC < 15 mm × 12 mm (0.59" × 0.47", pitch > 0.5mm)
Capacitor, Resistors, Inductors, Diode, Transistor,Audion,
SOT, SOP, QFP, QFN, CSP, and etc
|Nozzles rotate angles||360º can pick and place any sizes of components|
|Max No. of Feeders||14 pieces||20 pieces|
|Feeder types||Pneumatic drive|
|Feeder sizes available||8mm,12mm,16mm, 24mm ,32mm|
|Operation System||Windows XP or Windows 7|
|Programming Method||PC and Visual Camera aligment|
|Net Weight||Approx 800kg||Approx 900kg|
|Air Pressure||0.6MPa (6kgf/cm2)|
|Power Supply||Single Phrase ,220V, 50/60Hz|
For More pls contact : 1. Skype : Peter.huang187
2. Tel: 13610497541
3.Wechat : peterhuang187